Combinatorial Auction-based Mechanisms for Composite Web Service Selection

Composite service selection presents the opportunity for the rapid development of complex applications using existing web services. It refers to the problem of selecting a set of web services from a large pool of available candidates to logically compose them to achieve value-added composite services. The aim of service selection is to choose the best set of services based on the functional and non-functional (quality related) requirements of a composite service requester. The current service selection approaches mostly assume that web services are offered as single independent entities; there is no possibility for bundling. Moreover, the current research has mainly focused on solving the problem for a single composite service. There is a limited research to date on how the presence of multiple requests for composite services affects the performance of service selection approaches. Addressing these two aspects can significantly enhance the application of composite service selection approaches in the real-world. We develop new approaches for the composite web service selection problem by addressing both the bundling and multiple requests issues. In particular, we propose two mechanisms based on combinatorial auction models, where the provisioning of multiple services are auctioned simultaneously and service providers can bid to offer combinations of web services. We mapped these mechanisms to Integer Linear Programing models and conducted extensive simulations to evaluate them. The results of our experimentation show that bundling can lead to cost reductions compared to when services are offered independently. Moreover, the simultaneous consideration of a set of requests enhances the success rate of the mechanism in allocating services to requests. By considering all composite service requests at the same time, the mechanism achieves more homogenous prices which can be a determining factor for the service requester in choosing the best composite service selection mechanism to deploy

Rapid One-Pot DMAP-Promoted Synthesis of Biologically Important 3-Amino-1H- benzo[f]chromene-2-carbonitriles

Abstract An efficient environmentally friendly procedure for the synthesis of biologically important 3-amino-1H-benzo[f]chromene-2-carbonitriles through the one-pot, three-component reaction of β-naphthol, aromatic aldehydes, and malononitrile using p-dimethylaminopyridine (DMAP) as an effective and novel heterogeneous catalyst under thermal solvent-free conditions is described. The catalyst is inexpensive and readily available and can be recovered conveniently and reused efficiently such that a considerable catalytic activity still could be achieved after the third run. Other advantages of this procedure are high yields, relatively short reaction times, easy work-up, and absence of any volatile and hazardous organic solvents

Strategies to increase port competitiveness

Improving the competitiveness of local businesses and their products within worldwide markets is a vital element for the long-term economic growth of a region. This paper presents a summary of ongoing research needs and outcomes formulated from a partnership between the University of Queensland and the Port of Brisbane Pty Ltd (PBPL), in order to facilitate international trade growth in Queensland and improve PBPL’s competitiveness. As part of this partnership with PBPL, we explore strategies to overcome inefficiencies in supply chain and infrastructure and discuss subsequent prospects for further investigation. The key goals of the partnership program for transport-related issues have been identified as: (i) providing a platform for freight actors trading through the port, in order to increase the performance of their logistics operations by adopting cooperative strategies; (ii) exploring modal shift opportunities to enhance the sustainability and the efficiency of the logistics operations of importers and exporters; (iii) facilitating improved inland supply chains for local export commodities through new trans-shipment points, back-loading opportunities, and logistics cost minimisation

Developing a fault prediction model for wired copper networks under precipitation

Telecommunication companies who face challenges of aging infrastructure need to balance the cost of maintenance with that of providing their services within a service level guarantee. For Telstra, the largest telecommunication company in Australia, this balance is achieved by adopting a passive approach to handle the faults that occur in the network. Rather than actively preventing faults, technicians are assigned to fix faults in a timely manner. However, to achieve an efficient and timely technician assignment, a prediction model is needed to advise planners of the potential number of faults in the network. From statistical analysis, we have developed a fault prediction model by investigating 29 months of data of faults. Our prediction model shows that rain has a significant impact on the number of faults in many areas across Australia, which can be the result of the aging infrastructure

Studying the Effect of Lactobacillus fermentum on Arc and CREB Genes Expression of Involved in The Memory of Alzheimer\'s Rats

Introduction: Alzheimer's disease is a common progressive neurogenerative disease that leads to dementia and destruction of brain cells, especially in areas related to learning and memory such as the hippocampus. The role of the Arc gene in synaptic flexibility and memory consolidation has been proven and its expression is strongly influenced by neuronal activity. The aim of this study was to investigate the effect of Lactobacillus fermentum on the expression of Arc (effective in synaptic flexibility and memory consolidation) and CREB (effective in stabilizing synaptic changes during learning) genes, involved in the memory of Alzheimer's rats. Material & ethods: In this study that was conducted in 2019, 30 male Wistar rats were divided into 5 groups (control, Alzheimer and 3 groups as treatment). In the treatment groups, simultaneously with induction of Alzheimer by stereotaxic method with streptozotocin, supernatant of Lactobacillus fermentum PTCC 1744 in MRS broth with doses of 108, 107, and 106 cfu/ml was injected intraperitoneally for 21 days. After RNA extraction from hippocampus samples, cDNA was synthesized and the expression of the genes was evaluated by real-time PCR and LinReg PCR software. Findings: The data showed an increase in gene expression of Arc and CREB in the treatment groups with a dose of 106 cfu/ml compared to the Alzheimer's group and the difference was significant (P <0.001). Discussion & conclusion: Extracellular compounds of L. fermentum may inhibit the progression of neuronal lesions due to their antioxidant and anti-inflammatory effects and may be effective in improving Alzheimer's

Global burden of chronic respiratory diseases and risk factors, 1990–2019: an update from the Global Burden of Disease Study 2019

Background: Updated data on chronic respiratory diseases (CRDs) are vital in their prevention, control, and treatment in the path to achieving the third UN Sustainable Development Goals (SDGs), a one-third reduction in premature mortality from non-communicable diseases by 2030. We provided global, regional, and national estimates of the burden of CRDs and their attributable risks from 1990 to 2019. Methods: Using data from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019, we estimated mortality, years lived with disability, years of life lost, disability-adjusted life years (DALYs), prevalence, and incidence of CRDs, i.e. chronic obstructive pulmonary disease (COPD), asthma, pneumoconiosis, interstitial lung disease and pulmonary sarcoidosis, and other CRDs, from 1990 to 2019 by sex, age, region, and Socio-demographic Index (SDI) in 204 countries and territories. Deaths and DALYs from CRDs attributable to each risk factor were estimated according to relative risks, risk exposure, and the theoretical minimum risk exposure level input. Findings: In 2019, CRDs were the third leading cause of death responsible for 4.0 million deaths (95% uncertainty interval 3.6–4.3) with a prevalence of 454.6 million cases (417.4–499.1) globally. While the total deaths and prevalence of CRDs have increased by 28.5% and 39.8%, the age-standardised rates have dropped by 41.7% and 16.9% from 1990 to 2019, respectively. COPD, with 212.3 million (200.4–225.1) prevalent cases, was the primary cause of deaths from CRDs, accounting for 3.3 million (2.9–3.6) deaths. With 262.4 million (224.1–309.5) prevalent cases, asthma had the highest prevalence among CRDs. The age-standardised rates of all burden measures of COPD, asthma, and pneumoconiosis have reduced globally from 1990 to 2019. Nevertheless, the age-standardised rates of incidence and prevalence of interstitial lung disease and pulmonary sarcoidosis have increased throughout this period. Low- and low-middle SDI countries had the highest age-standardised death and DALYs rates while the high SDI quintile had the highest prevalence rate of CRDs. The highest deaths and DALYs from CRDs were attributed to smoking globally, followed by air pollution and occupational risks. Non-optimal temperature and high body-mass index were additional risk factors for COPD and asthma, respectively. Interpretation: Albeit the age-standardised prevalence, death, and DALYs rates of CRDs have decreased, they still cause a substantial burden and deaths worldwide. The high death and DALYs rates in low and low-middle SDI countries highlights the urgent need for improved preventive, diagnostic, and therapeutic measures. Global strategies for tobacco control, enhancing air quality, reducing occupational hazards, and fostering clean cooking fuels are crucial steps in reducing the burden of CRDs, especially in low- and lower-middle income countries

The global burden of cancer attributable to risk factors, 2010-19 : a systematic analysis for the Global Burden of Disease Study 2019

Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.Peer reviewe

Development and analysis of the Soil Water Infiltration Global database

In this paper, we present and analyze a novel global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and the USA. In addition to its extensive geographical coverage, the collected infiltration curves cover research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use was gathered along with the infiltration data, making the database valuable for the development of pedotransfer functions (PTFs) for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements ( ∼ 76%) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on land use is available for 76% of the experimental sites with agricultural land use as the dominant type ( ∼ 40%). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for public domain use only and can be copied freely by referencing it. Supplementary data are available at https://doi.org/10.1594/PANGAEA.885492 (Rahmati et al., 2018). Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend and update the SWIG database by uploading new data to it

Auction-Based Models for Composite Service Selection: A Design Framework

Composite service selection refers to the process of selecting an optimal set of web services out of a pool of available candidates based on their quality of service and price. The goal is to logically compose these atomic web services and create value-added composite services which in turn can be used to develop service-based systems. Existing approaches to composite service selection are mostly based on optimization and negotiation techniques. In this paper, we study an emerging trend of composite service selection approaches based on auction models. These techniques benefit from the dynamic pricing of auction models compared to a fixed pricing approach and have the potential to incorporate the dependencies that exist between services constituting a composition. We propose a design framework that introduces two components which need to be addressed when developing an auction-based model for composite service selection: the elements in an auction-based model and a set of design decisions associated with those elements